1
/
of
5
Alexor Studio
Ink Pad: Stampin Up (Top)
Ink Pad: Stampin Up (Top)
Regular price
$12.00 USD
Regular price
Sale price
$12.00 USD
Quantity
Couldn't load pickup availability
Introducing Brand NEW Ink Pad Holders with soft-grip design!
Stampin Up Ink Pad Holder is compatible with the following Full Size Ink Pad:
- Stampin Up Classic Foam Ink Pads: 2-5/8" x 3-1/2”
Soft-grip design gently holds your ink pads in place so they don't fall out if you need to move the carousel from one area to another.
AND it stacks below existing brush and ink refill platforms!
Made with PETG plastic for lighter, stronger storage. The Top layer is 4 mm (0.12 inch) tall and weighs only 116 gms (3.7 oz).
The Top layer has holes where connector pins can be used to attach a stacking platform (not the base) or different Type of ink pads (a middle layer - not the base) above it.
To add a platform for wedges, remove the three plugs (green) and replace them with blue connector pins. Then carefully, align and insert the stacking platform (not the base) onto the pins.
To add another stack of different type (Multi-Pad or Altenew), remove the four plugs (purple) and replace them with blue connector pins. Then carefully, align and insert the middle ink pad layer (not the base) onto the pins.
Extra clear hole plugs are provided, if you wish to use it just as the top of your tower. Replace the three green and four purple plugs with the clear ones.
NOTE: Stack multiple middle layers. One top layer is required for a stack of Stampin Up Ink pad holders. The Base layer has a turnstile and is optional. If you are stacking different types of ink pads on top of each other, you only need the base layer for the Type that is at the bottom of the tower.
If you have any questions regarding your desired configuration, please email service@alexor.com for assistance.
Share
